Skip to main content

10Gigabit OM3 Aqua 50/125 Multimode LC to LC Fiber Optic Patch Cable

We supply the LC to LC 10Gigabit OM3 multimode fiber optic cable that can transmit 10G signal. Huihong Tech's 10Gig fiber optic patch cables are designed to meet this requirement ,these LC-LC 10g duplex fiber optic patch cords are with aqua OM3 50/125 fiber glass and they are typically used in 10 Gigabit Ethernet,

fiber optic installation jobs
our 10gigabit fiber optic patch cables the bandwidth supported is as specified IEEE802.3z which is for gigbit ethernet. Huihong Tech duplex10gig fiber optic patch cords are manufactured according to TIA-492AAAC-A standard for OM3 cable ,and the typical cable color is as per aqua standard which was developed by Lucent technologies

LC to LC 10Gig OM3 Multimode duplex fiber optic patch cable features:
Support 10 Gigabit data transmitting rates
Connectors are with UPC polish
Ceramic ferrules provide alignment
OM3 50/125 fiber optic glass
Used to connect patch panels and/or network devices that require 50/125 multimode cable.
Fully compliant with international industry standard
Fulfill high bandwidth needs

Comments

Post a Comment

Popular posts from this blog

The first transatlantic telephone cable to use optical fiber

The first transatlantic telephone cable to use optical fiber was TAT-8, based on Desurvire optimised laser amplification technology. It went into operation in 1988. Third-generation fiber-optic systems operated at 1.55 μm and had losses of about 0.2 dB/km. This development was spurred by the discovery of Indium gallium arsenide and the development of the Indium Gallium Arsenide photodiode by Pearsall. Engineers overcame earlier difficulties with pulse-spreading at that wavelength using conventional InGaAsP semiconductor lasers. Scientists overcame this difficulty by using dispersion-shifted fibers designed to have minimal dispersion at 1.55 μm or by limiting the laser spectrum to a single longitudinal mode. These developments eventually allowed third-generation systems to operate commercially at 2.5 Gbit/s with repeater spacing in excess of 100 km (62 mi). fiber optic technician certification The fourth generation of fiber-optic communication systems used optical amplification to
3 comments
Read more

What Are Backlinks?

     Backlinks (also known as “inbound links”, “incoming links” or “one way links”) are links from one website to a page on another website. Google and other major search engines consider backlinks “votes” for a specific page. Pages with a high number of backlinks tend to have high organic search engine rankings. https://plus.google.com/url?q=https%3A%2F%2Fhoneywebsolutions.com%2F https://plus.google.com/url?q=https%3A%2F%2Fwww.honeywebsolutions.com%2F https://plus.google.com/url?q=http%3A%2F%2Fhoneywebsolutions.com%2F https://www.google.com/url?q=https%3A%2F%2Fhoneywebsolutions.com%2F https://www.google.com/url?sa=t&url=http%3A%2F%2Fhoneywebsolutions.com https://www.google.com/url?sa=t&url=https%3A%2F%2Fhoneywebsolutions.com%2F https://maps.google.com/url?q=https%3A%2F%2Fhoneywebsolutions.com%2F https://maps.google.com/url?sa=t&url=http%3A%2F%2Fhoneywebsolutions.com https://images.google.de/url?q=https%3A%2F%2Fhoneywebsolutions.com%2F https://maps.google.de/url?q=https%3A%
1 comment
Read more

Radius of curvature

The radius of curvature of the cables must not be exceeded. The fiber optic cable may break when it twists or bends too much, especially during pulling. If there are no specific recommendations of the cable manufacturer, it should not be pulled at a radius of curvature less than 20 (twenty) times the diameter of the cable. When finished pulling, the cable should not have any radius of curvature less than 10 (ten) times the diameter of the cable. Vertical cable installations Whenever possible, it is better to lay the cables vertically down than to pull them up. Cables should be fastened at frequent intervals to avoid excessive tension in the jacket. They can be fastened with cable ties (well adjusted, but not enough to deform the cable jacket) or with Kellem type fasteners. Use the storage loops to help fix the cable and to provide cable for future repairs or re-installation. Internal plant wiring with trays Many times, the fiber optic cable in the wiring in the internal plan
Post a Comment
Read more