Skip to main content

SNMP Managed Fiber Media Converter


SNMP Managed Ethernet Media Converter enable user to monitor the working status of the converter and to inspect the connection type status as well as to configure system parameters. SNMP managed fiber optic media converters are used in the chassis, they are pluggable type into the media converter chassis, the converter types can be single mode or multimode, single fiber WDM fiber optic media converter or common dual fiber types, they are designed with redundancy power supply. This type converter is used with our Netriver softwares.

managed fiber converter

 SNMP Managed Fiber Media Converter SNMP Managed Fiber Media Converter

Main functions of the network management are listed below:
1. Standard serial RS232 port is well compatible with the serial ports of computer, The administrator can log in it by CONSOLE, and initialize the configuration for network management.
2. With good compatibility, standard 10M Ethernet port can be connected to switch with straight-through Cat5 cable or to host computer with crossover Cat5 cable.
3. With power-off protection, NVRAM can store important information safely, such as IP and MAC address of the management card, system time, access password , etc. If the power was cut off, the system need not reconfiguration.
4. Provide the memory storage function of E²PROM and store important information of network management card, such as production data, manufacturer, equipment serial number, the type and description of this network management card, etc.
5. Provide 4M FLASH and 8M SDRAM.
6. Real-time monitor local and remote device status through the network management software, such as, temperature, voltage, port connection, etc.
7. Support hot swap.
8. The LEDs are convenient for operating.
9. Provide real-time clock display of system.
certified fiber optic technician salary
The hardware characteristics are followed:
1. CPU: XPC850 series
2. SDRAM 8Mbytes
3. Flash     4Mbytes
4. NVRAM 64Kbit
5. Built-in serial port based on SMCI RS-232
6. Built-in BaseT Ethernet based on SCCI
7. Built-in BDM port for adjustment
8. I/O connector with high credibility
9. I2C storage function
10. Voltage and temperature sensor

Comments

Post a Comment

Popular posts from this blog

The first transatlantic telephone cable to use optical fiber

The first transatlantic telephone cable to use optical fiber was TAT-8, based on Desurvire optimised laser amplification technology. It went into operation in 1988. Third-generation fiber-optic systems operated at 1.55 μm and had losses of about 0.2 dB/km. This development was spurred by the discovery of Indium gallium arsenide and the development of the Indium Gallium Arsenide photodiode by Pearsall. Engineers overcame earlier difficulties with pulse-spreading at that wavelength using conventional InGaAsP semiconductor lasers. Scientists overcame this difficulty by using dispersion-shifted fibers designed to have minimal dispersion at 1.55 μm or by limiting the laser spectrum to a single longitudinal mode. These developments eventually allowed third-generation systems to operate commercially at 2.5 Gbit/s with repeater spacing in excess of 100 km (62 mi). fiber optic technician certification The fourth generation of fiber-optic communication systems used optical amplification to
3 comments
Read more

What Are Backlinks?

     Backlinks (also known as “inbound links”, “incoming links” or “one way links”) are links from one website to a page on another website. Google and other major search engines consider backlinks “votes” for a specific page. Pages with a high number of backlinks tend to have high organic search engine rankings. https://plus.google.com/url?q=https%3A%2F%2Fhoneywebsolutions.com%2F https://plus.google.com/url?q=https%3A%2F%2Fwww.honeywebsolutions.com%2F https://plus.google.com/url?q=http%3A%2F%2Fhoneywebsolutions.com%2F https://www.google.com/url?q=https%3A%2F%2Fhoneywebsolutions.com%2F https://www.google.com/url?sa=t&url=http%3A%2F%2Fhoneywebsolutions.com https://www.google.com/url?sa=t&url=https%3A%2F%2Fhoneywebsolutions.com%2F https://maps.google.com/url?q=https%3A%2F%2Fhoneywebsolutions.com%2F https://maps.google.com/url?sa=t&url=http%3A%2F%2Fhoneywebsolutions.com https://images.google.de/url?q=https%3A%2F%2Fhoneywebsolutions.com%2F https://maps.google.de/url?q=https%3A%
1 comment
Read more

What are backlinks

 First of all, it’s necessary to sort out “what is a backlink”. There is no need to explain everything in detail. The main thing to understand is what it is for and how it works. A backlink is a kind of Internet manipulator. It links one particular site with other external websites which contain links to this site. In other words, when you visit external sites they will lead you to that particular site. Backlinks are used for SEO purposes to optimize a website in a proper way. Backlinks are external links to your website. They show the transition from one site to another or from one page to another. They help to index your website’s pages correctly. SEO backlinks are an essential part of the search engine optimization process. They help search bots to crawl your site and rank it correctly to its content. Each backlink is a part of a ranking puzzle. That’s why every website owner wants to get as much as possible backlinks due to improving website’s SEO ranking factors. It’s a type of ci
Post a Comment
Read more